WorkingRouters

This page lists routers and wireless access points that people have used successfully with DSLinux.

If a router is not listed here, it doesn't mean that it doesn't work, only that no one who has this router has tested it with DSLinux and posted the results here.

Rules

Please only list devices that work!

Please be very specific with the name of your router. Simply listing a device as "DLink" or "Linksys" will not help anyone. "Linksys WRT54G v3.1" is much better, for example.

You don't have to list your own name, but it might help people if they want to contact you in case they have a question. Add any issues or special circumstances of your setup in the "Comment" field. Thanks for contributing.

The List

Router Model

My name is...

Comment

2wire BT Wireless Home Hub 1800HG

Moobert

DHCP and WEP works using WFC.

3com OfficeConnect ADSL Wireless 11g Firewall Router

aves

Had some problems, but after switching to channel 1 + 11b only: DHCP, 128bit WEP works

Actiontec GT701-WG (Qwest DSL modem)

numbertwo

Works great with static ip and 128bit WEP. DHCP did not work.

Apple Airport (Dual Ethernet)

antgeth

DHCP only works with v4.0.6 or lower firmware.

Apple Airport Extreme

cayenne

ASCII WEP keys need to be exactly 13 characters

Acer WLAN-G-RU1

silentguy

WEP works, DHCP works (at least using a PC as DHCP server)

Asus Wl500gx

modrak

tried without auth - Oleg's firmware 1.9.2.7-7e

Belkin F5D7230-4 v8000

Skywire

With SSID broadcast, WEP, and DHCP on channel 11 -- doesn't seem to work on channel 1.

Canyon CN-WF514

Clockwork

works with DHCP without WEP, static IPs or/and WEP not working

Cisco Aironet (AIR 1230-B Series)

cbeok

As of 9-08-07, DHCP works well (sorry, I don't have administration access to the router, so I don't know its firmware version).

Cisco Aironet 1200

modrak

tried without auth - DHCP doesn't work, need to use static IP. Roaming doesn't work, DS sees 6 separate APs

Conceptronic C54APM (54Mbps Wireless Access Point)

 

tried without auth - tried with static IPBR

D-Link DI-524

Nfearnley

WPA is not supported by DSLinux, so I turned off encryption. DHCP does not work. Connection only worked twice.

D-Link DI-524

nana

Newest firmware revision works fine with DHCP. Havend tested wep encryption yet.

D-Link DI-624+

Ebeno

WEP works, DHCP doesn't. Works with static IP and settings.

D-Link WBR-1310

Doctor

DHCP, WEP 64 and 128 tested and work, have to cycle interface nds for new settings to take (ifconfig nds down;ifconfig nds up)

Freebox V.4 + Wi-Fi 802.11G (PCMCIA)

LEXLuTHoR]

WEP (Hex) & DHCP works, MAC Filtering ON (tested on R4DS Card)

FRITZ!Box WLAN 3070, Firmware-Version 19.04.07

Butzel

WEP works, DHCP relayed from 2nd Fritz.Box (because this is my network-infrastrukte)

Hawking HWR54G, Revision M

chongtin

Updating firmware to Version 1.1 Release 2C is a MUST, or the performance of the router is poor. Tested with WEP 64 and static IP setting.

Linksys BEFW11S4 v2 with firmware 1.45.10 (April 15, 2004)

m3lang3

DHCP, WEP 128 works.

Linksys Wireless-B

hedgehog

DHCP & WEP work using channel 1. using firmware 1.50.14

Linksys WAG54GS v1

 

Static IP, DHCP & WEP work with Annex A 1.01.03 firmware.

Linksys WRH54G

Aaron Lehrian (JSMaster)

Works when channel 6 is specified, WEP works also, though not thouroghly tested.

Linksys WRTGS54 v4

I.C.Wiener

Works (Firmware: DD-WRT v23 SP2)

Linksys WRTGS54 v5

Mobadass

Works haven't tested everything though

Linksys WRTGS54 v4

I.C.Wiener

Works (Firmware: DD-WRT v23 SP2)

Linksys WRT54GL v1.1

stsp

I've tried with the openwrt firmware only, not with the original one.

Linksys WRT54GL v1.1

pointless

Firmware: DD-WRT v23 SP2 (09/15/06) vpn (tried without auth)

Linksys WRT54G v8

skibur

DHCP, WEP 64 bits (128 bits should work), and MAC Filters works.

Linksys WRV54G version 1(or unmarked)

Weex

DHCP, WEP 128 works.

Linux 2.6 with SMC2532W-B (Prism2 card)

Doctor

DHCP, Wep 64 works fine. Using hostap driver put into master mode.

Livebox Inventel

sam101

DHCP doesn't works with a DS ,so use static IP adresses . WEP work .Firmware:A2pBT009c1.d17d

MSI RG54G2

pointless

Firmware: R1.0.8.0 ETS[Oct 13 2005] (tried without auth)

NETGEAR DG834

zmx

WEP works, static IP, broadcast SSID, DHCP seems to stop the startup script

NETGEAR MR-814

Pepsiman

DHCP doesn't work, so use static IP addresses. WEP does work.

NETGEAR WG602 v3

Asimov

DHCP, Fixed IP, WEP

NETGEAR WGR614v5

arbitrary

WEP works, static IP, broadcast SSID, DHCP works, MAC filtering off

NETGEAR WGT634U

GnieOfMars

Works fine with fixed IP settings and WEP (WFC works with DHCP, dslinux apparently no).

PC running OpenBSD 3.9 with DIGITUS DN-7006G-RA PCI wireless adapter (Ralink chipset) in HostAP mode

stsp

WEP did not work back when I tried, but this could have been due to open auth not working, which has been fixed in DSLinux since.

Pentagram Cerberus ADSL WiFi 802.11g Lite

Subaru

rc.conf configured without DHCP WEP turned off connection works well used channel 11

USRobotics 5462, HW version 01

aletorchic

Works with static IP, WEP (WFC works with DHCP, dslinux apparently no)(Runtime Code Version: V1.00.014,Boot Code Version: V0.00.07)

USRobotics 8054

modrak

tried without auth - everything works just fine.

Yakumo Wireless Storage 60

Vogt31337

Installed OpenWRT WhiteRussian 0.9, works fine.

ZyXEL Prestige 660HW-61

tr3

works

Trendnet TEW-423BRP

FrancoGlacius

Works, except that you must (the first time) connect from within 10 feet to get it to work. after that, its fine. WEP and DHCP work